Whole-House Repipe
Replace all aging water lines with PEX-A or Type-L copper for long-term reliability.
Learn more- HOME
- FAQS
HOUSTON HOMEOWNERS
Repipe FAQ
Straight answers from Houston repipe specialists. No fluff — just what you need to know before scheduling a free inspection.
We focus on repipes and reroutes — not general plumbing repairs.
How to use this page
Find the Question That Matches Your Problem
Most homeowners start with symptoms — rusty water, low pressure, recurring leaks, or a slab leak. Those symptoms often point to a system-wide issue. A free inspection confirms scope and the right solution.
FAQ
Most Common Repipe Questions
These answers match how our inspections and repipe process work across Houston-area homes.
Free in-home inspection with clear scope, options, and a written quote — no pressure.
What We Do
Explore Our Most Common Repipe Services
Choose the issue you’re experiencing — we’ll confirm the right solution during your inspection.
Galvanized Pipe Replacement
Eliminate rust, clogs, and weak pressure caused by failing galvanized lines.
Learn moreSlab Leak Repipe / Reroute
Above-slab reroutes that eliminate repeat slab leaks with minimal disruption.
Learn moreLow Water Pressure
Identify system-wide restrictions and restore strong pressure throughout the home.
Learn moreRusty Water Pipes
Stop brown or discolored water by replacing corroded pipes system-wide.
Learn moreCopper Pipe Repipe
Fix recurring pinhole leaks and corrosion by replacing the failing copper system.
Learn morePEX vs Copper Repiping
Side-by-side guidance to choose the best material for your home and budget.
Learn moreSewer Line Replacement
Sewer line replacements and reroutes with minimal disruption to your property.
Learn moreFAQ
Most Common Repipe Questions
Straight answers from Houston repipe specialists. We focus on repipes and reroutes — not general plumbing repairs.
What is repiping, and why would I need it?
Repiping replaces the failing water pipe system in your home. If you’re dealing with recurring leaks, rusty water,
low water pressure, or a slab leak, those are usually symptoms of system-wide pipe failure — not isolated issues.
How do I know if my home needs repiping?
Common signs include recurring leaks, water pressure dropping over time, rusty or discolored water, pinhole leaks in copper,
and repeated plumbing repairs. If multiple fixtures are affected, it’s typically a system problem.
How long does a whole-house repipe take?
We complete most homes in as little as 1–2 days, with water restored the same day in most cases.
Final timing depends on home size, access, and scope confirmed during inspection.
Will you have to open walls or ceilings?
We open strategic access points to route new piping, plan routing to minimize impact, and include drywall patching and touch-ups wherever we open walls.
Will my water be shut off during the repipe?
Water is typically shut off only during tie-ins and final connections — not for the entire project.
The exact schedule depends on scope and is explained during inspection.
Do you repair slab leaks?
We specialize in slab leak repipe / reroutes, not patch repairs under concrete.
Once a slab leak is confirmed, rerouting above the slab is often the safest way to prevent repeat leaks
and avoid unnecessary jackhammering.
Do you break floors or jackhammer concrete for slab leaks?
In most cases, no. We route new plumbing through walls, ceilings, or the attic to avoid slab demolition whenever possible.
What causes rusty or brown water?
Rusty water is typically caused by internal pipe corrosion — especially older galvanized or steel piping.
Filters can reduce symptoms, but they don’t stop pipes from deteriorating internally.
Can galvanized pipes be repaired instead of replaced?
No. Galvanized pipes corrode from the inside out. Spot repairs don’t restore pipe diameter or stop system-wide corrosion.
Replacement is the only permanent solution.
Why is my water pressure low throughout the home?
When pressure is low at multiple fixtures, it’s often caused by restricted flow inside aging pipes
(corrosion, mineral buildup, narrowing). A full repipe restores flow by replacing the restricted system.
Do I have to choose PEX or copper?
No. We install both PEX-A and Type-L copper.
The best option depends on layout, access, and long-term goals. We review both after inspection and make a clear recommendation.
Is PEX safe for drinking water?
Yes. PEX-A is approved for potable water and is widely used for residential repipes.
We use code-compliant materials and installation methods.
How much does a repipe cost?
Pricing depends on home size, fixture count, access, routing complexity, and material choice.
We provide clear, written pricing after inspection once the scope is confirmed. See whole house repipe cost ranges by home size.
Do you offer financing?
Yes. Financing options may be available for qualified homeowners and are reviewed after inspection once scope and pricing are confirmed.
Free in-home inspection with clear scope, options, and a written quote — no pressure.
Ready to Get Started?
Get Clear Answers in a Free In-Home Inspection
If your home is showing signs of pipe failure — leaks, rusty water, low pressure, or slab leaks — the fastest path to a real solution is confirming the scope and options in person.
We’ll explain routing, material options (PEX-A or Type-L copper), timeline, and provide a written quote — with no pressure.
Free in-home inspection. Clear scope, options, and a written quote — no pressure.
Prefer a number right now? You can calculate your repipe cost in seconds with our free online tool.
Existing Customers
Need Service or Support After Your Repipe?
If you’ve already worked with We Do Repipes and need a follow-up, service request, or support help, submit the form below. We route your request through our support system so nothing gets missed.
New estimate? Use our inspection request form to schedule a free in-home evaluation.
To help us respond faster, include:
- Your service address and best callback number
- Project date (approx.) if known
- Which fixtures/areas are affected
- Photos (if applicable)
- Any urgent timing constraints
If this is urgent, call us directly at (832) 819-8337.
Submit a Customer Service Request
This form connects to our Zoho Desk support queue.