HOUSTON’S SLAB LEAK REROUTE SPECIALISTS
Houston Slab Leak Repair — We Repipe Above the Slab, Not Under It
A slab leak under a Houston foundation is rarely an isolated problem—it’s a sign your copper is corroding system-wide. The only permanent fix is rerouting the plumbing above the slab.
- Reroute every line above the slab in a single 1–2 day visit
- PEX-A or Type-L copper matched to your home’s layout
- Pressure-tested and inspected before we leave
Serving Houston, Katy, Cypress, The Woodlands & surrounding areas.
Get Your Free Slab Leak Repipe Inspection
No sales pressure. Clear scope, options, and a written quote.
Trusted by Thousands of Houston Homeowners
Licensed & insured. Clear repipe plans. Fast installation. Clean, professional finish.
Next, confirm whether the issues you’re seeing are signs of a failing pipe system.
Free in-home inspection to confirm whether a slab leak reroute or repipe is the right solution for your home.
Repipe 101
What Is a Slab Leak Repipe (Reroute)?
A slab leak repipe (also called a reroute) replaces failing copper water lines that run beneath the concrete slab by moving your plumbing out of the foundation and into accessible routes through walls or the attic. This eliminates repeat slab leaks, prevents future foundation risk, and stops the cycle of patch repairs.
What We Replace
- Copper water lines buried under the slab that are prone to repeat leaks
- Corroded or thinning copper sections that fail after the first repair
- High-risk runs feeding kitchens, bathrooms, and water heaters
What’s Included
- Modern PEX-A or Type-L copper piping installed above the slab
- Clean access points with floor protection and contained work areas
- Pressure testing, final walkthrough, and repairs where needed
If your home has widespread pipe failure beyond the slab, you can also review our whole-house repipe service for a full system replacement overview.
PEX vs Copper
Choosing the Right Material After a Slab Leak
When copper pipes fail under a slab, rerouting the plumbing above the foundation allows homeowners to choose between modern PEX-A or new Type-L copper. The right option depends on your home’s layout, access points, and long-term goals — not a one-size-fits-all answer.
Why Many Houston Homes Choose PEX-A
- Gets water where it needs to go — PEX’s flexible routing is ideal for above-slab reroutes
- Fewer leak points — minimal fittings behind walls means less that can go wrong
- Holds up to Houston water — immune to the corrosion that caused your slab leak in the first place
- Stronger, more even pressure — consistent flow even across longer rerouted runs
When Copper Still Makes Sense
- You prefer traditional metal piping — and some homeowners simply do
- Your layout favors it — certain wall and attic configurations work better with copper
- You’re doing a partial reroute — copper is a strong choice for targeted zones
- We only use Type-L — the thicker, more durable grade
During your inspection, we’ll explain both options and recommend the best fit based on your home’s layout, budget, and long-term reliability goals. You can also explore the full comparison here: PEX vs Copper Repiping in Houston .
How It Works
Our Slab Leak Repipe (Reroute) Process
We keep the process structured, clean, and predictable from start to finish — so you know exactly what to expect before, during, and after your slab leak reroute or repipe.
Free Inspection & Written Scope
We evaluate your plumbing system, confirm whether the slab leak is tied to failing copper under the foundation, and explain the safest long-term solution. You receive a clear, written scope and quote — no pressure.
Routing Plan & Home Protection
We plan the cleanest reroute path through walls or the attic, protect floors and work areas, and prepare access points to minimize disruption inside your home.
Install New Above-Slab Piping
We safely bypass the failing copper under your slab and install a new system above the foundation using PEX-A or Type-L copper—eliminating the source of repeat slab leaks.
Pressure Testing & Quality Checks
We pressure-test the system, verify fixture performance, and confirm stable water pressure before closing up any access points.
Drywall Repairs & Final Walkthrough
We patch every drywall opening, include touch-ups where access was needed, and walk you through the completed job before we leave.
If your home has widespread pipe failure beyond the slab, you can also review our whole-house repipe service for a full system replacement overview.
Most slab leak reroutes and repipes are typically a one- to two-day job, depending on home size and access.
Why Choose Us
Why Houston Homeowners Trust We Do Repipes for Slab Leaks
Slab leaks caused by copper pipes under the foundation aren’t routine plumbing repairs. Homeowners choose us because we specialize in rerouting and replacing failing systems — with licensed, in-house crews and a process designed specifically for Houston slab homes.
Licensed, In-House Repipe Specialists
All slab leak reroutes and repipes are completed by our own trained crews — not subcontractors — for consistent quality and accountability.
1–2 Day Slab Leak Reroutes
Most slab leak reroutes and repipes are completed over a single weekend, minimizing disruption while eliminating repeat leaks.
Clean, Controlled Installations
Floor protection, contained access points, drywall repairs, and touch-ups are included where access is required.
Clear, Written Scopes
You receive a clear, written scope and quote upfront — with routing options explained before work begins.
PEX-A or Type-L Copper
We install both materials and recommend the best fit based on your home’s layout, usage, and long-term reliability.
Built for Houston Homes
Our reroute methods and planning are tailored specifically to Houston slab foundations and local water conditions.
Our Work
Real Slab Leak Reroute Projects by Our In-House Team
Every slab leak reroute is completed by our own licensed repipe specialists. See what a clean, above-slab installation looks like before you schedule.
Tip: Click an image to enlarge. On mobile, swipe to view more.
Want a deeper breakdown of what to expect? Learn more on our
Slab Leak Repipe Houston
page.
If your home has widespread pipe failure beyond the slab, you can also review our
Whole House Repipe Houston
page for a full system replacement overview.
FAQ
Houston Slab Leak Repipe FAQ
Clear answers to the most common questions Houston homeowners ask when dealing with slab leaks caused by copper pipes under the foundation.
Do you repair slab leaks?
No. Slab leaks indicate a failing plumbing system under the foundation. We eliminate the problem by rerouting the plumbing above the slab — not patching individual leaks.
Will you need to break my floors or jackhammer concrete?
No. Our slab leak reroute process avoids slab demolition by routing new plumbing through walls, ceilings, or the attic.
How long does a slab leak repipe take?
Most slab leak reroutes are completed in as little as 1 day. Larger homes or complex layouts may take longer, but water service is typically restored the same day.
Do I need a full repipe for a slab leak?
In many cases, yes. Homes with slab leaks often have aging copper piping throughout the system. A whole-house repipe is often the most reliable long-term solution.
Do I have to choose PEX or copper?
No. We’ll explain PEX vs copper during your inspection and recommend what makes the most sense for your home.
Can I finance a slab leak repipe?
Yes. We offer flexible financing options , including low monthly payments, discussed during your inspection.
Planning your budget? See our Houston repipe pricing for typical cost ranges.
Ready to Get Started?
Stop Repairing Slab Leaks. Fix the System.
Repeat slab leaks mean the copper under your foundation is failing—not something a spot repair will fix. The only permanent solution is rerouting the plumbing above the slab.
Our licensed in-house crew handles the entire reroute—clear scope, upfront pricing, and most jobs done over a single weekend.
Free in-home inspection to confirm whether a slab leak reroute or repipe is the right solution for your home.
