HOUSTON’S COPPER REPIPE SPECIALISTS
Full Repipe Solution for Aging Copper Pipes
Pinhole leaks, low pressure, and blue-green staining mean your copper is corroding from the inside. A full repipe is the only permanent fix.
A full repipe replaces the entire aging system at once, eliminating repeat leaks, restoring strong water pressure, and reducing the risk of hidden damage inside walls or under the slab .
- Replace every failing line in a single 1–2 day visit
- PEX-A or Type-L copper matched to your home’s layout
- Pressure-tested and inspected before we leave
Not sure whether to replace with copper again or upgrade to PEX-A? Compare options here: PEX-A vs Copper Repiping .
Serving Houston, Katy, Cypress, The Woodlands & surrounding areas.
Get Your Free Copper Pipe Inspection
No pressure. Clear scope, options, and a written quote.
Trusted by Thousands of Houston Homeowners
Licensed & insured. Clear repipe plans. Fast installation. Clean, professional finish.
Next, confirm whether the issues you’re seeing are signs of a failing pipe system.
Free in-home inspection to confirm whether a full repipe is the right solution for your home.
Repipe 101
What Is a Whole-House Repipe for Aging Copper Pipes?
When copper pipes start failing, the problem is rarely limited to one location. A whole-house repipe replaces every aging water line in your home — from the main supply to each fixture — eliminating recurring pinhole leaks, pressure loss, and hidden corrosion failures inside walls or under the slab.
What We Replace
- Aging copper lines with pinhole leaks and corrosion
- High-risk copper runs feeding kitchens, bathrooms, and water heaters
- Problem sections that keep leaking after repairs
What’s Included
- Modern PEX-A or Type-L copper piping
- Floor protection and clean, contained work areas
- Drywall patching, touch-ups, and final walkthrough
Want a deeper breakdown? Learn more about our Houston whole-house repipe service and how it’s designed to eliminate repeat leaks and future pipe failures.
PEX vs Copper
Choosing the Right Material for a Full Repipe
When aging copper plumbing begins to fail, the solution is a full repipe . We install both PEX-A and Type-L copper; the right choice depends on your home’s layout, access points, and long-term goals — not a one-size-fits-all answer.
Why Many Houston Homes Choose PEX-A
- Reaches every corner of your home — PEX’s flexible routing makes whole-home repipes faster and cleaner
- Fewer leak points — minimal fittings behind walls means less that can go wrong down the road
- Holds up to Houston water — immune to the corrosion and mineral buildup that eats through copper over time
- Consistent water pressure across the entire system
When Type-L Copper Makes Sense
- You prefer traditional metal piping — and some homeowners simply do
- You’re repiping the whole system — copper performs well when installed end to end
- Your layout favors it — certain access conditions and configurations work better with copper
- We only use Type-L — the thicker, more durable grade
During your inspection, we’ll explain both options and recommend the best fit for a full repipe based on your home’s layout, budget, and long-term reliability goals. You can also explore the full comparison here: PEX vs Copper Repiping in Houston .
How It Works
Our 1–2 Day Full Repipe Process
We keep the process structured, clean, and predictable from start to finish — so you know exactly what to expect before, during, and after replacing a failing copper plumbing system.
Free Inspection & Written Scope
We evaluate your entire plumbing system, identify widespread copper deterioration, and explain whether a full repipe is the safest long-term solution. You receive a clear, written scope and quote — no pressure.
Protection & Routing Plan
We lay protective coverings over floors and work areas, map an efficient route based on your home’s layout, and complete all prep work to minimize disruption inside your home.
Install New PEX-A or Type-L Copper
We safely bypass the failing copper and install a new, code-compliant piping system cleanly and efficiently throughout the home.
Drywall Repairs & Touch-Ups
We patch every drywall opening and include paint touch-ups wherever access was needed.
Final Pressure Test & Walkthrough
We pressure-test the entire system, verify every fixture, and walk you through the completed job with you before the job is finished.
Want a deeper breakdown? Learn more about our whole-house repipe service and how it’s designed to eliminate repeat leaks and future pipe failures.
Most whole-house repipes are typically a one- to two-day job.
Why Choose Us
Why Houston Homeowners Trust We Do Repipes for Failing Copper Pipes
When copper pipes start failing, the problem is rarely limited to one leak. Homeowners choose us because we focus exclusively on full repipes — replacing the entire failing system with licensed, in-house crews and a clean, proven process built for Houston homes.
Licensed, In-House Repipe Specialists
All work is completed by our own trained repipe crews — not subcontractors — for consistent quality and accountability.
1–2 Day Full Repipes
Most whole-house repipes are completed over a single weekend to minimize disruption while eliminating future copper failures.
Clean Job Sites
Floor protection, drywall repairs, and paint touch-ups are included where access is required, with a clean, controlled process from start to finish.
Transparent Scopes & Quotes
Clear, written scope and pricing explained upfront — including routing approach, materials, and timeline — so there are no surprises.
PEX-A or Type-L Copper Options
We install both materials and recommend the best fit for a full repipe based on your home’s layout, usage, and long-term reliability goals.
Proven Local Track Record
Trusted across Greater Houston with a repeatable repipe process designed to eliminate repeat leaks, pressure loss, and hidden pipe failures.
Our Work
Real Whole-House Repipes by Our In-House Team
Every project is completed by our own licensed repipe specialists. See what a clean, professional full repipe looks like before you schedule.
Tip: Click an image to enlarge. On mobile, swipe to view more.
Want a deeper breakdown of what to expect? Learn more on our Whole House Repipe Houston page.
FAQ
Copper Pipe Failure & Full Repipe FAQ
Answers to the most common questions Houston homeowners ask when copper pipes begin to fail and a full repipe becomes the safest long-term solution.
What causes copper pipes to fail in Houston?
Houston’s water chemistry contains minerals and disinfectants that accelerate internal corrosion inside copper pipes. Over time, this leads to pinhole leaks, blue or green staining, restricted water flow, and system-wide deterioration.
Can copper pipe leaks be repaired instead of repiping?
In most cases, no. Once copper pipes begin developing pinhole leaks, the failure is typically widespread. Repairs may stop one leak temporarily, but they rarely prevent future failures elsewhere in the system.
How long does a whole-house repipe take?
Most whole-house repipes are completed in 1–2 days. We stage and route the new system first so water is only shut off briefly during the final connection.
Is PEX-A better than copper for Houston homes?
In most cases, yes. PEX-A is corrosion-proof, flexible, quieter, and designed to handle pressure expansion without weakening. While new copper may be an option in select cases, it is often not recommended due to long-term failure risks in Houston’s environment.
Will my walls or ceilings need to be opened?
Yes. Strategic access points are required to remove failing copper and route the new system. After installation, we patch drywall, match texture, and perform paint touch-ups before completing the project.
Will my water be off during the repipe?
Only briefly. We keep your existing system active while routing the new lines. Water is shut off for a short period during the final tie-in — not for the entire project.
Wondering what copper repiping costs? See our Houston repipe pricing for real ranges.
Ready to Get Started?
Stop Repairing Failing Copper Pipes. Repipe the System.
Repeat leaks, low pressure, and discolored water mean your copper is failing—not something a patch will fix.
A full repipe eliminates the problem at the source—new piping throughout, installed by our licensed in-house crew over a single weekend.
Free in-home inspection to confirm whether a full repipe is the right solution for your home.
